Features and Benefits
- Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, IEC 60870-5-104
- Supports IEC 60870-5-101 master/slave (balanced/unbalanced mode)
- Supports IEC 60870-5-104 client/server
- Supports Modbus RTU/ASCII/TCP client(master)/server(slave)
- Effortless configuration via web-based wizard
- Complete diagnostic information for maintenance
- Embebbed Modbus and IEC 101/104 traffic monitoring
- Redundant dual DC power inputs and one relay output
- microSD card for configuration backup and event logs
- -40 to 75°C wide operating temperature models available
- Serial port with 2 kV built-in isolation protection
- Built-in Ethernet cascading for easy wiring
- Security features based on IEC-62443
The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating widely power common use protocols, MGate 5114 provides the flexibility to fulfill various conditions when facing the difference of protocols used between the field devices and the power SCADA. To integrate Modbus or IEC 60870-5-101 devices onto a IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.
Easy Configuration via Web Console
The MGate 5114 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a
Modbus RTU/ASCII/TCP Protocol Traffic Monitor
MGate 5114 gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101 and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth to mention that the traffic logs also can be shown in a popular troubleshooting tool, Wireshark. With that feature, you can easily analyze the the traffic to find out the root cause quickly.
MGate 5114 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PSCADA when a device gets disconnected or does not respond, in which case the PSCADA gets the status of each end device and then issues alarms to notify operators.
Unit: mm (inch)