NPort 5450 w/ adapter By Moxa

4 port device server, 10/100M Ethernet, RS-232/422/485, DB9 connectors, 12-48 VDC

Price: $475.00 & Free Shipping

Qty:
Add To Cart

Features and Benefits

  • 10/100M auto-sensing Ethernet
  • 4 serial ports supporting RS-232/422/485
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • Configure via Telnet/Web/Windows utility
  • SNMP MIB-II for network management
  • 2 kV isolation protection for NPort 5430I/5450I/5450I-T
  • -40 to 75°C operating temperature range (T model)

Overview

Network Readiness for up to Four Serial Devices

NPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.

Independent Operation Mode for Each Serial Port

NPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.

User-friendly LCD Panel for Easy Installation

An LCD panel is built into the NPort® 5400’s top panel, with four buttons for inputting data, configuration, and selecting the operation mode. The LCD panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide temperature models.)

Dual DC Power Inputs

NPort® 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power input gives users greater flexibility for use with different applications.

Adjustable Termination and Pull High/Low Resistors

The NPort 5400 series provides adjustable termination and pull high/low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with all environments, the NPort® 5400 has four sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.

Appearance

Dimensions

Pin Assignments

Accessories

Optional Power Supply

AC24VT

AC24VT - AD17-24C

Universal AC (100 to 240V) Power Supply to 24VDC, Terminal Block

$18.00
Qty:

Optioanl Mounting

DK35A

DK35A

Moxa DK35A

$4.00
Qty:

Din Rail Power Supplies

MDR-60-24

MDR-60-24

Moxa MDR-60-24

$125.00
Qty:
DR-75-24

DR-75-24

Moxa DR-75-24

$119.00
Qty:
DR-4524

DR-4524

Moxa DR-4524

$85.00
Qty:
DR-120-24

DR-120-24

Moxa DR-120-24

$129.00
Qty:

Connectors

Mini DB9F-to-TB

Mini DB9F-to-TB

Moxa Mini DB9F-to-TB

$11.00
Qty:

Wiring Terminals

TB-M9

TB-M9

Moxa TB-M9

$35.00
Qty:
TB-F9

TB-F9

Moxa TB-F9

$35.00
Qty:
TB-M25

TB-M25

Moxa TB-M25

$40.00
Qty:
TB-F25

TB-F25

Moxa TB-F25

$40.00
Qty:

Power Adaptors

PWR-12150-USJP-SA-T

PWR-12150-USJP-SA-T

Moxa PWR-12150-USJP-SA-T

$39.00
Qty:
PWR-12125-WPUSJP-S1

PWR-12125-WPUSJP-S1

Moxa PWR-12125-WPUSJP-S1

$25.00
Qty: