EDR-G9010-VPN-2MGSFP-CT

Introduction

The EDR-G9010 Series is a set ofhighly integrated industrial multi-port secure routers with firewall/NAT/VPNand managed Layer 2 switch functions. These devices are designedfor Ethernet-based security applications in critical remote controlor monitoring networks. These secure routers provide an electronicsecurity perimeter to protect critical cyber assets including substationsin power applications, pump-and-treat systems in water stations, distributedcontrol systems in oil and gas applications, and PLC/SCADA systemsin factory automation. Furthermore, with the addition of IDS/IPS,the EDR-G9010 Series is an industrial next-generation firewall, equippedwith threat detection and prevention capabilities to further protectcritical infrastructure from cybersecurity attacks.

MX-ROS AddressesGrowing Cybersecurity Threats

Moxa’s MX-ROS (https://www.moxa.com/en/spotlight/portfolio/mx-ros/index) is a software platform for industrial security routers and firewalls.The platform supports the robust security and user-friendly operationof secure routers through simplified web and CLI interfaces. In additionto adhering to IEC 62443-4-2, MX-ROS devices offer a wealth of thelatest cross-industry Operational Technology (OT) network managementfeatures with each release to safeguard hardware and software.

Defend Against Malicious Threats With Advanced Cybersecurity Features

The EDR-G9010 Series’ embedded firewall usespolicy rules to control network traffic between trusted zones whileNetwork Address Translation (NAT) shields the internal network fromunauthorized access by outside hosts. The Virtual Private Networking(VPN) functionality further provides users with secure communicationtunnels when accessing the private network from the public Internet.To help protect your OT assets from cyberattacks, the EDR-G9010 Seriessupports Deep Packet Inspection (DPI) to examine the data portionof network packets for various OT-specific protocols.

Simplify Configurations With the User-friendly Interface and QuickSettings

The EDR-G9010 Series’ Setup Wizard provides an easy wayfor users to set up WAN, LAN, and Bridge ports for routing functionalityin just four steps. In addition, the object-based firewall managementfeature gives engineers a simple way to configure and maintain firewallfiltering for IP addresses and subnets, network services, industrialapplication services, and user-defined services.

Industrial-gradeDesign to Ensure Uninterrupted Network Connectivity

The EDR-G9010Series’ rugged hardware makes these secure routers ideal for harshindustrial environments, featuring wide-temperature models that arebuilt to operate reliably in hazardous conditions and extreme temperaturesof -40 up to 75°C. Moreover, the EDR-G9010 Series supports comprehensiveLayer 2 and Layer 3 redundancy mechanisms to ensure that your networkstays connected at all times.

Virtual Patchingand Intelligent Threat Protection

Patching remainsa major challenge in OT environments because OT applications cannotafford interrupting operations by shutting down systems to apply patches.Virtual patching technology can help complement existing patch managementprocesses by shielding known and unknown vulnerabilities. In addition,the EDR-G9010 features intelligent IPS functionality for continuousprotection against cyberthreats which uses pattern-based detectionto identify and block known attacks.